Boondock Bowfishing Shelf Style Arrow rest instructions page

Thank you for purchasing a Boondock Bowfishing rest for your bow. 

To begIn you will want to remove any old rest if there is already one on the bow. Then you will want to use some rubbing alcohol to clean the shelf area of the bow when then rest will be installed. The supplied hardware is just designed to snug the rest to the bow. You should apply a thin layer of clear silicone sealant (not supplied) to the back of the rest and then install the rest to the bow. Now use the supplied hardware to snug the rest to the bow and let sit for at least 8 hours before use. you should periodically check the hardware to make sure it is not loosening.. DO NOT OVER TIGHTEN THE HARDWARE AS YOU MAY CRACK THE REST IN THE PROCESS!!!!